This application note dedicated to viscosity conversion describes how to use our online microfluidic calculator as a tool to convert the units employed to represent your fluid properties, notably, the fluid dynamic viscosity.
The viscosity is an important parameter in many industrial applications, from food to biomedical applications. It will impact numerous aspects of fluid engineering:
Elveflow’s online microfluidic calculator has been designed to help researchers and especially non-specialists of the microfluidics field. It helps you assess key parameters to configure your microfluidic experiment such as the microfluidic resistance in your system.
It should be noted that every microfluidic chip and setup are different. Those differences will likely have an impact on the calculations performed using the tool.
It is likely that the actual parameters would vary based on real world experimental conditions.
Therefore, each time you make adjustments to your parameters, male sure to recalculate the results.
Here, we use a generic microfluidic system to give you a basic understanding of the parameters to select the right components for your setup.
Here are some of the many applications made easier by this calculator:
Discover the microfluidic online calculator
Enter the value that you wish to convert in the top menu, select the initial unit.
Click on convert and obtain the resulting converted value as shown in the picture.
Enter the converted value in the Fluid properties section if you wish to pursue the microfluidic calculation to estimate flow rates, hydraulic resistance or shear stress.
Please refer to the application note: how to implement/convert the fluid properties inside my reservoir.
Either you can select from the drop down menu of the commonly used fluids in microfluidics or custom parameters for viscosity and density.
For the sake of this demo, we will use medium with 10% serum, commonly used.
How can we help you?
Name*
Email*
Message
Newsletter subscription
We will answer within 24 hours
By filling in your info you accept that we use your data.
Do you want tips on how to best set up your microfluidic experiment? Do you need inspiration or a different angle to take on your specific problem? Well, we probably have an application note just for you, feel free to check them out!
Microfluidics is the science of handling small amounts of liquids, inside micrometer scale channels. Discover how to handle fluids for your microfluidic experiments.
This application note demonstrates a smart use ouf Elveflow's Pressure sensor and sensor reader for Direct-Ink-Writing flow control.
Learn how to set up your development environment for Elveflow products with this comprehensive tutorial.
This user guide will show you how to run microfluidic colocalization studies of single molecule spectroscopy.
This application note explores the basic principle of pneumatic pumps and a flow controller based on the basic principle of pneumatic pumps, known as pressure driven flow control. It also demonstrates the applications of pressure driven flow control in a range of industrial & research fields.
Flow regulation is a compulsory operation in most of the microfluidics operations. In some applications such as 2D or 3D cell culture, flow regulation is essential since accurate micro-environmental parameters control is required. Elveflow do it’s best to make this operation as easy as possible to help you to focus on what really matter in your setup.
Study the impact of molecular transport on cell cultures with a cross flow membrane chip and microfluidic instruments.
Precise liquid injection system for manipulation of small volumes of fluids using the MUX distribution and the MUX recirculation valve.
This application note explains how to set up a robust and reproducible microfluidic platform for liposomes assembly with improved encapsulation efficiency and reduced polydispersity in size.
Single-wall carbon nanotubes (SWCNTs) are considered as quasi 1-dimensional (1D) carbon nanostructures, which are known for their outstanding anisotropic electronic, mechanical, thermal and optical properties.
This application note describes how to combine and synchronise liquid perfusion and imaging using an Olympus spinning disc confocal microscope together with an Elveflow pressure-driven flow controlled microfluidic system.
Mixing is a crucial step for several microfluidic applications like chemical synthesis, clinical diagnostics, sequencing and synthesis of nucleic acids
This application note describes how microfluidic can be employed as a nanoparticle generator based on the example of PLGA bead generation.
Learn how to perform PLGA nanoparticle preparation with Elveflow instruments and a microfluidic chip
Get a quote
Collaborations
Need customer support?
Serial Number of your product
Support Type AdviceHardware SupportSoftware Support
Subject*
I hereby agree that Elveflow uses my personal data Newsletter subscription
Message I hereby agree that Elveflow uses my personal data Newsletter subscription