From biochemical to omics analysis
High accuracy and control for reproducible results
From droplet generation to single cell encapsulation
Particle encapsulation help preserve the chemical, physical, and biological properties of active compounds – from drugs to nucleic acids, cells, and organoids.
Encapsulating cells in droplets:
Start from scratch and quickly master all key parameters – from droplet generation to cell encapsulation.
Whether you are an expert or a beginner, we provide all you need to understand droplet generation and start to encapsulate cells straight away.
This pack is composed of the premium Elveflow product line and our best-seller, the OB1 flow controller. Thanks to the high performance of this equipment set, you will be able to:
All the pack items are adjustable to your laboratory infrastructure and experimental requirements.
Build your pack in three quick and easy steps:
Microfluidics provides reproducibility and control over droplet size that you can not achieve using any other technique. Our technology allows you to:
All our application notes
All our reviews
1) 2-channel flow controller (OB1-2200)
2) 2 x flow rate sensors
3) 2 x flow resistors
4) 2 x ChipShop microfluidic droplet chips
5) Reservoirs and holder
And more!
Our two versions only differ by the flow rate range of the oil phase.
Important note: our products are all intercompatible and you may acquire additional flow rate sensors or add extra products for specific applications. You will still benefit from the centralised ESI software control.
“I found the systems quite robust, easy to connect and use.”Dr. Martino Chiara, ETH Zurich, SwitzerlandOB1 pressure-driven flow controller user
“Thanks to Elveflow products, we can focus on our results rather than the tedious instrumentation. We especially appreciate the Elveflow system when it comes to droplet based systems which requires the control of multiple flows simultaneously. ”Dr. Caglar Elbuken, Bilkent University, TurkeyOB1 pressure-driven flow controller user
“We are satisfied with the ELVEFLOW instrument, the regulation accuracy is well fitted with our applications. The advantage of this instrument is the capability it offers to easily move the experiments anywhere you want. This feature is very convenient, especially when we encapsulate cells into droplets in cell culture platforms.”Pr. Annie Viallat, Adhesion & Inflammation Lab CNRS UMR 6212 Inserm UMR 600, FranceOB1 pressure-driven flow controller user
“We are very satisfied of the ELVEFLOW pressure pumps! The ELVEFLOW pressure pumps enable us to perform portable experiments with accurate pressure control.”Dr. Wiebcke Drenckhan, Liquids Interfaces Group of the Physic of Solids Lab - CNRS UMR 8502 Orsay University, FranceOB1 pressure-driven flow controller user
“The advantages of this instrument are its ease of use and the accuracy of the regulated pressure. This feature is very convenient, especially when we perform foams and microfluidic.”Dr. Pascal Panizza, Soft Matter Department of IPR – CNRS UR1 UMR6251, FranceOB1 pressure-driven flow controller user
“I was suprised how quickly I was able to get things to work once I got going.”Jamie Stover, Research Assistant, M. Zernicka-Goetz Lab at California Institute of Technology (Caltech)OB1 pressure-driven flow controller user
Elveflow developped a microfluidic calculator that allows you to estimate all the key parameters at stake in your microfluidic system. Find out more below !
To help you determine your flow rate, pressure to apply, the best tubing resistance length for your setup, wall shear stress for biology applications, cell culture, and many more…
Elveflow provides its microfluidic calculator and…to make the most of our microfluidic calculator, find below a set of dedicated application notes:
The microfluidic chip is where the two immiscible phases (water and oil here) are precisely injected and mixed to generate monodisperse droplets (CV < 3%). The two microfluidic chips are made of Topas. Topas is a cyclic olefin copolymer (COC) resin which is a chemical relative of polyethylene and other polyolefin plastics.
Are you working with small samples or are you looking into manufacturing 100x mLs of emulsion? Elveflow offers a comprehensive range of reservoirs compatible with our OB1 Flow Controller, from 1.5 mL Eppendorf tubes to 100mL bottles.
Flow resistors consist in the assembly of PEEK capillaries with small internal diameters. Those resistors are used to increase the resistivity of the microfluidic system to improve the stability and control of the flow rate in the system.
Simple and intuitive instructions are provided to quickly and easily make droplets and control droplet generation parameters. When starting out, the user can follow step by step the provided protocol to obtain droplets of the specific size. In a second stage, the user can rely on the numerous tips provided and explore the “going further” section to complete its training in droplet generation and microfluidic flow control.
Contact our experts to get yours!
For any help to determine what microfluidic instruments you need, you can contact us! Our experts will help you build the best microfluidic setup for your application, with our state-of-the-art microfluidic line.
Get a quote
Name*
Email*
Message
Newsletter subscription
We will answer within 24 hours
By filling in your info you accept that we use your data.
Collaborations
Need customer support?
Serial Number of your product
Support Type AdviceHardware SupportSoftware Support
Subject*
I hereby agree that Elveflow uses my personal data Newsletter subscription
How can we help you?
Message I hereby agree that Elveflow uses my personal data Newsletter subscription