Microfluidics knowledge

Flow controller For accurate and easy flow control Discover You need a microfluidics partner for Horizon Europe? Discover the Microfluidic Innovation Center. Discover

Archived content. See more recent content: Application notes & reviews

You have 2 possibilities to order Elveflow Accessories. You can either:

Contact us directly for any Quote or Tech Support request, or to place a Purchase Order.
The Elveflow Accessories team is as always ready to serve you and make your experience with us a pleasure.

Alternatively, you can browse the Elveflow Accessories product line on Darwin Microfluidics and order online. Darwin Microfluidics is our new online reseller, so go check it out !

MICROFLUIDIC FITTINGS & CONNECTORS

1/4″-28 fittings kit

Fluidic 187 herringbone ChipShop chip info

APPLICATIONS

Designed to connect the elements of your setup (manifolds, reservoirs, bubble trap) to a pressure source and to the liquid flow.

FEATURES & BENEFITS

• Reusable
• Installable in a few seconds
• Designed for 1/16 OD tubing
• Designed for 3/32 ID tubing

KIT CONTENTS

Kit Contents	1- Teflon end fittings + ferrules with 1/4″-28 thread for 1/16 OD Tubing (x10).2- 1/4″-28 UNF Thread to 3/32″ ID Barb (x10).
Thread Port Configuration	1/4″-28 Flat-Bottom
Material	Item 1: Blue Teflon™ PFA Resin + Blue Tefzel™ ETFE ResinItem 2: Black Nylon over Polypropylene
Pressure Rating Max (psi)	2000
Pressure Rating Max (bar)	138
For Tubing OD (in)	1/16 (Item 1)
For Tubing ID (in)	3/32 (Item 2)

REQUEST QUOTE / GET TECH SUPPORT

Send an email to ELVEFLOW Microfluidics Accessories Tech Support.

Luer Lock fittings kit

APPLICATIONS

Block /Connect a female Luer Lock outlet to 3/32 ID tygon tubing.

FEATURES & BENEFITS

• Reusable
• Easy to install.
• Designed for 1/16 OD tubing and 3/32 ID tubing

KIT CONTENTS

Kit Contents	1- Male Luer Integral Lock Ring Plug (x10). 2- Male Luer Integral Lock to 3/32″ OD Barb (x10).
Thread Port Configuration	Male Luer Lock
Material	Nylon
For Tubing ID (in)	3/32

REQUEST QUOTE / GET TECH SUPPORT

Send an email to ELVEFLOW Microfluidics Accessories Tech Support.

10-32 fittings kit

APPLICATIONS

Connect 1/16″ OD, or 3/32″ ID tubing to 10-32 threaded elements.

FEATURES & BENEFITS

• Reusable
• Easy to install.
• Designed for 1/16 OD tubing and 3/32 ID tubing.

KIT CONTENTS

Kit Contents	1- 10-32 UNF PEEK Fitting for 1/16″ Tubing with ETFE Ferrules (x10). 2- PP 10-32 UNF Thread 3/32″ OD Barb (x10).
Thread Port Configuration	1/4″-28 Flat-Bottom
Material	Red Peek, White PP
Pressure Rating Max (psi)	400-800
Pressure Rating Max (bar)	27-55
For Tubing OD (in)	1/16 (Item 1)
For Tubing ID (in)	3/32 (Item 2)

REQUEST QUOTE / GET TECH SUPPORT

Send an email to ELVEFLOW Microfluidics Accessories Tech Support.

Female Luer Adapter

APPLICATIONS

Connect any male Luer Lock outlet (e.g. syringe) to 1/4-28 elements.

FEATURES & BENEFITS

• Reusable
• Installable in a few seconds
• Robust

KIT CONTENTS

Kit Contents	Female Luer ETFE Adapters (x5).
Thread Port Configuration	1/4″-28 Flat-Bottom to Female Luer
Material	ETFE resin
Thru hole (mm)	1.30

REQUEST QUOTE / GET TECH SUPPORT

Send an email to ELVEFLOW Microfluidics Accessories Tech Support.

Male Luer Adapter

APPLICATIONS

Connect a female Luer Lock outlet (e.g. OB1 pressure outlet) to 1/4-28 threaded elements.

KIT CONTENTS

Thru hole (mm) 1.30

Kit Contents	1/4-28 Female to Male Luer Adapter (x5)
Port Configuration	1/4-28 Female to Male Luer
Material	ETFE Resin

REQUEST QUOTE / GET TECH SUPPORT

Send an email to ELVEFLOW Microfluidics Accessories Tech Support.

23 G Steel Flow Couplers

APPLICATIONS

Connecting soft tygon tubing to your PDMS chip.

FEATURES & BENEFITS

• Reusable
• Easy to install.
• Robust (stainless steel)
• Designed to be used with with Tygon tubing 1/16″ OD x 0,51mm ID.

KIT CONTENTS

Kit Contents	23G Stainless Steel Couplers 0,025″ OD x 0,013″ ID (x100):
Connection type	Insertion into softTygon tubing
Material	Stainless Steel
Dimensions (inches)	0.025 OD x 0.013 ID, 0.590 long

REQUEST QUOTE / GET TECH SUPPORT

Send an email to ELVEFLOW Microfluidics Accessories Tech Support.

6-40 to 1/4″-28 ADAPTERS

Single cell encapsulation microfluidic title photo

APPLICATIONS

Convert any UNF 6-40 Fluid Connector Port to a ¼-28 flat-bottom for 1/16” or 1/8” OD tubing.

FEATURES & BENEFITS

• Robust (PEEK)
• Easy to install
• Compatible with standard 1/4-28 fittings.

KIT CONTENTS

Kit Contents	UNF 6-40 to ¼-28 flat-bottom fluid connector port adapter (x2)
Thread Port Configuration	UNF 6-40 to ¼-28 flat-bottomk
Material	PEEK

REQUEST QUOTE / GET TECH SUPPORT

Send an email to ELVEFLOW Microfluidics Accessories Tech Support.

1/4″-28 UNIONS

APPLICATIONS

Connect different elements (e.g. tubing type) with 1/4-28 fittings.

KIT CONTENTS

Kit Contents	1/4-28 to 1/4-28 internal threads Standard Union (x 2)
Thread Port Configuration	1/4″-28 Flat-Bottom
Material	ETFE
Pressure Rating Max (psi)	1000
Pressure Rating Max (bar)	69
Thru hole (in)	0.03
Thru hole (mm)	0.8

REQUEST QUOTE / GET TECH SUPPORT

Send an email to ELVEFLOW Microfluidics Accessories Tech Support.

Pressure / Vacuum Connection

APPLICATIONS

Connect pressure or vacuum source to your setup.

FEATURES & BENEFITS

• Reusable
• Easy to install.
• Robust
• All in one set

Connections
•6mm Pneumatic Tube (2m)
•Adaptor,G1/4 x6mm (x1)
•Adaptor,G1/4 x8mm (x1)
•Adaptor,G1/4 x10mm (x1)
•Brass female sleeve,1/4 in (x1)
•7mm barbed adapter for rubber hose (x1)
•10mm barbed adapter for rubber hose (x1)
•Steel Hose Clamp 13 to 16mm (x1)
•Steel Hose Clamp 14 to 22mm (x1)
Extensions
•Pneumatic Tee Tube-to-Tube Adapter, Push In 6 mm (x1)
•Pneumatic Cross Tube-to-Tube Adapter Push In 6 mm (x1)
•Flow Regulator G1/4 X 6mm (x1)