Archived content. See more recent content: Application notes & reviews
Obsolete!
See the new product page here
“This is not a coincidence if the NASA trusts us”
The Starter Pack holds all necessary elements for you to start your own microfluidic experiments. The Starter Pack is a comfortable instrumental base covering most of the needs of microfluidicists. The Microfluidic Starter Pack is very easy to improve: you can add supplementary modules later, according to your needs.
Feel free to contact us if you would like further information or if you have a particular request.
Feel free to contact us at: contact@elveflow.com
Email*
Message Hi Elveflow team, I need more information about Newsletter subscription
The pack has been designed around our best seller, the most performant microfluidic flow control system on the market. With 4 independant channels and ranges from 0 to 2 bar, the OB1 Mk3 covers the majority of microfluidic applications. It is very easy to take over thanks to the software included in the pack.
We have developped a software enabling to control and automate all your setup parameters. It is provided in its FULL PACKAGE version which includes all the control and measurement modules. It is very to use and enable to control all instruments of the ELVEFLOW brand.
The pack also includes 4 reservoirs specifically designed for microfluidics which are very simple to connect with our pressure controller. Those 4 reservoirs are 50 mL BD Falcon™.
The pack contains all necessary in terms of fittings and connectors. Based on our experience with microfluidicists, we offer in this pack a set of elements allowing to connect devices as well as reservoirs and chips.
Each channel of your OB1 Mk3 pressure controller can be coupled with a flow sensor. Using our feedback loop, you can monitor and control flow rate in your microfluidic setup while keeping stability and responsiveness of pressure driven flows.
Need additional options for you setup? We warrant the pack compatibility with all current and upcoming modules…
Example of use of the Starter Pack
On the left is a basic example of use of a pressure controller in a microfluidic setup with a 4 channels’ chip.
You can control your different liquids independently with pressure or flow rate (by adding a flow sensor) and automate the whole stup with the software. One of the main advantages of the pressure controller is to disallow flow oscillations and be very fast in your flow rate changes (no inertia) while remaining extremely stable.
You could then add, if you like, different modules by picking them in our product line (valve, sensor…).
Slow response time, flow oscillations, microfluidic chips break… You have probably met this kind of issue with your peristaltic and syringe pumps. To fix these main issues more and more researchers use our microfluidic pressure pump based on piezoelectric technology (see more details here).
[/TS_VCSC_Info_Notice]
Email* I hereby agree than Elveflow uses my personal data
Get a quote
Name*
Message
Newsletter subscription
We will answer within 24 hours
By filling in your info you accept that we use your data.
Collaborations
Need customer support?
Serial Number of your product
Support Type AdviceHardware SupportSoftware Support
Subject*
I hereby agree that Elveflow uses my personal data Newsletter subscription
How can we help you?
Message I hereby agree that Elveflow uses my personal data Newsletter subscription