Published on 27 August 2019
Video: Hydrodynamic focusing inside a microfluidic device
Microfluidicists use Hydrodynamic flow focusing in microfluidics as a powerful tool, that can be used for numerous applications, such as microfluidic mixing, separations, sensors, cell analysis, flow cytometry, diffusion-controlled chemical reactions and microfabrication. Hydrodynamic flow focusing occurs when fluids with different velocities are injected side by side. The most common way to perform hydrodynamic focusing is to use a 3 inlets microfluidic chips, where the core flow containing the sample of interest is sheathed by an inert fluid.
In this application note, we will detail the microfluidics setup used to easily perform precise flow focusing, and we will see how to take advantage of OB1 MK3+ flow controller’s performance to create a perfectly focused stream.
Flow controller OB1 MK3+
Sample reservoirs
Fittings
Tubing
Microfluidic device
[starter_pack_rebound]
Narrow precise and stable microfluidic flow focusing using Elveflow OB1 Pressure Controller
The Elveflow® Smart Interface is a user-friendly software that will allow you to easily perform different experiments of flow focusing. The aim of the hydrodynamic focusing is to position the elements of interest (fluid, cells, particles) at a precise spot, and thus the flow control has to be reactive and stable. We are going to see how we can obtain unique and accurate flow focusing thanks to the OB1 Mk3 Elveflow flow controller.
In this first video, we are gradually decreasing the pressure applied to the middle channel to obtain a very narrow stream. Note that the stream obtained can be really thin and remains stable in time.
Complex flow focusing using Elveflow OB1 Pressure Controller
It is also possible to create complex flow focusing by applying pressure patterns, such as ramps to the middle outlet of the pressure controller. The focusing can thus be quickly adjusted from a large stream to a very narrow stream positioned precisely in the microfluidic channel.
Flow focusing inside a microfluidic device using the Elveflow OB1 Pressure Controller
By applying ramps with a 180° shift to the two border streams, you can easily create an oscillating middle stream. The middle stream stay really stable with the same width and can be extremely thin.
Microfluidic blood flow behavior with hydrodynamic focusing using Elveflow OB1 Pressure Microfluidic
It is also possible to load custom pressure patterns. In the following example, an electrocardiogram pattern is applied to the middle stream and mimics the blood flow circulation.
Do you want tips on how to best set up your microfluidic experiment? Do you need inspiration or a different angle to take on your specific problem? Well, we probably have an application note just for you, feel free to check them out!
Discover a high-resolution microfluidic device designed for precise oil-in-water emulsion studies and coalescence analysis. Learn how Elveflow's advanced flow control enhances petroleum research and beyond.
Discover a simple and intuitive microfluidic water-in-oil droplet protocol under microscope monitoring
This application note demonstrates a smart use ouf Elveflow's Pressure sensor and sensor reader for Direct-Ink-Writing flow control.
Learn how to set up your development environment for Elveflow products with this comprehensive tutorial.
Single-wall carbon nanotubes (SWCNTs) are considered as quasi 1-dimensional (1D) carbon nanostructures, which are known for their outstanding anisotropic electronic, mechanical, thermal and optical properties.
This application note describes how to combine and synchronise liquid perfusion and imaging using an Olympus spinning disc confocal microscope together with an Elveflow pressure-driven flow controlled microfluidic system.
The MUX Wire enables you to host up & control many valves of your choice. It gives you a total freedom to add up to 16 valves and put them anywhere in your set-up and control them independently and simultaneously.
Mixing is a crucial step for several microfluidic applications like chemical synthesis, clinical diagnostics, sequencing and synthesis of nucleic acids
This application note describes how microfluidic can be employed as a nanoparticle generator based on the example of PLGA bead generation.
This user guide will show you how to run microfluidic colocalization studies of single molecule spectroscopy.
This application note explores the basic principle of pneumatic pumps and a flow controller based on the basic principle of pneumatic pumps, known as pressure driven flow control. It also demonstrates the applications of pressure driven flow control in a range of industrial & research fields.
Microfluidics is the science of handling small amounts of liquids, inside micrometer scale channels. Discover how to handle fluids for your microfluidic experiments.
Flow regulation is a compulsory operation in most of the microfluidics operations. In some applications such as 2D or 3D cell culture, flow regulation is essential since accurate micro-environmental parameters control is required. Elveflow do it’s best to make this operation as easy as possible to help you to focus on what really matter in your setup.
Study the impact of molecular transport on cell cultures with a cross flow membrane chip and microfluidic instruments.
OtherUpgradeSupportAdvanced RangeOEMServices / Training / Installation / RentalsMicrofabricationEssential RangeAccessories
Get in Touch
Need customer support?
Name*
Email*
Serial Number of your product*
Support Type AdviceHardware SupportSoftware Support
Subject*
Message
I hereby agree that Elveflow uses my personal data Newsletter subscription
Message I hereby agree that Elveflow uses my personal data Newsletter subscription
We will answer within 24 hours