Air bubbles are a very common issue for microfluidic experiments. The task to avoid air bubbles in the microfluidic device can be quite a difficult process. Moreover, they can be really detrimental for the experiment.
For more information about the cause of air bubbles and the issues they can create, check our dedicated review. But here, this application note will focus on two methods allowing you to remove air bubbles from your experiments.
OB1 MK3+ Flow controller
Sample reservoirs
Tubing
Fittings
Microfluidic device
Microfluidic bubble trap
When filling your microfluidic device with fluid, air bubbles are almost inevitable. These air bubbles can be difficult to detach, especially with complex chip designs. Moreover, air bubbles can appear during the experiment. Indeed, temperature changes, for example, can result in the formation of air bubbles.
In most cases, a smart use of your flow control system can help you to remove or avoid air bubbles. In the following examples, we will see how to use the OB1 MK3+ pressure controller to remove air bubbles.
In order to remove air bubbles trapped inside your microfluidic device, one of the easiest methods is to apply pressure pulses to detach them. The Elveflow Smart Interface software has pressure patterns already integrated. You can use a square pattern in order to create pressure pulses.
The frequency and amplitude can be adjusted for a better result to avoid air bubbles.
To best fit your needs, Elveflow developed three different types of bubble traps, with different sizes and therefore different internal volumes. It allows to choose the best trade of between an optimal air bubble absorption and a low dead volume in a range suited for microfluidics applications. You can see all the characteristics on the attached graph and on the product datasheet. Don’t hesitate to ask our expert for advice!
Another solution to remove the air bubbles trapped inside your chip is to pressurize both the inlet and outlet of the chip. This high pressure applied to the bubbles will enable a faster dissolution of the air inside the liquid. This technique will be more efficient with porous chips, such as PDMS devices, since the air will go through the porous material.
The setup used to dissolve air bubbles inside the chip is presented in the following scheme:
Air traps use a membrane permeable to gas and not permeable to aqueous liquids in order to remove air bubbles from your experiments. This kind of bubble trap can be placed in line, just before the chip, removing all the bubbles which could be inserted in the fluidic path before, during a change of sample for example.
This bubble trap can be used in two modes: a passive mode, and an active mode where a vacuum line can be added. In this second mode, a vacuum outlet of a pressure generator, such as the OB1 MK3, can be used to maximize the bubble trap’s efficiency. This bubble trap enables to achieve a 100% debubbling for a flow up to 60ml/min.
The following video shows the in line bubble removing performed with the bubble trap in passive mode.
You’ve got issues with your flow control system, such as instabilities or lack or responsiveness? Or you want to know more about pressure-driven flow control? Check our dedicated application note.
How can we help you?
Name*
Email*
Message
Newsletter subscription
We will answer within 24 hours
By filling in your info you accept that we use your data.
Do you want tips on how to best set up your microfluidic experiment? Do you need inspiration or a different angle to take on your specific problem? Well, we probably have an application note just for you, feel free to check them out!
Microfluidics is the science of handling small amounts of liquids, inside micrometer scale channels. Discover how to handle fluids for your microfluidic experiments.
This application note demonstrates a smart use ouf Elveflow's Pressure sensor and sensor reader for Direct-Ink-Writing flow control.
Learn how to set up your development environment for Elveflow products with this comprehensive tutorial.
Mixing is a crucial step for several microfluidic applications like chemical synthesis, clinical diagnostics, sequencing and synthesis of nucleic acids
This user guide will show you how to run microfluidic colocalization studies of single molecule spectroscopy.
This application note explores the basic principle of pneumatic pumps and a flow controller based on the basic principle of pneumatic pumps, known as pressure driven flow control. It also demonstrates the applications of pressure driven flow control in a range of industrial & research fields.
Flow regulation is a compulsory operation in most of the microfluidics operations. In some applications such as 2D or 3D cell culture, flow regulation is essential since accurate micro-environmental parameters control is required. Elveflow do it’s best to make this operation as easy as possible to help you to focus on what really matter in your setup.
Study the impact of molecular transport on cell cultures with a cross flow membrane chip and microfluidic instruments.
Precise liquid injection system for manipulation of small volumes of fluids using the MUX distribution and the MUX recirculation valve.
This application note explains how to set up a robust and reproducible microfluidic platform for liposomes assembly with improved encapsulation efficiency and reduced polydispersity in size.
Single-wall carbon nanotubes (SWCNTs) are considered as quasi 1-dimensional (1D) carbon nanostructures, which are known for their outstanding anisotropic electronic, mechanical, thermal and optical properties.
This application note describes how to combine and synchronise liquid perfusion and imaging using an Olympus spinning disc confocal microscope together with an Elveflow pressure-driven flow controlled microfluidic system.
This application note describes how microfluidic can be employed as a nanoparticle generator based on the example of PLGA bead generation.
Learn how to perform PLGA nanoparticle preparation with Elveflow instruments and a microfluidic chip
Get a quote
Collaborations
Need customer support?
Serial Number of your product
Support Type AdviceHardware SupportSoftware Support
Subject*
I hereby agree that Elveflow uses my personal data Newsletter subscription
Message I hereby agree that Elveflow uses my personal data Newsletter subscription