OB1 MK4 OEM

OEM Flow Controller

Customizable pressure and vacuum controller for microfluidics

FAST & STABLE

The best possible stability and response time

REDUCED SIZE

To fit in tiny spaces!

DESIGNED FOR INTEGRATION

Hardware and software integration ready

Straightforward system control

Combine it with our other OEM component to easily automate your fluidic platform

Talk to an expert

Features & benefits

Elveflow is the only company offering cutting edge piezoelectric technology for flow control, and we developed a unique expertise. Our OB1–OEM system takes full advantage of our experience in the field of scientific research, but is also fitted to industrial constraints. Your system will benefit from our high-quality, robust and easy to integrate technology.

The performances of a cutting-edge research instrument

Piezoelectric technology
From the aerospace and automobile industry

Designed for integration

The OEM version of the flow controller is designed to be integrated in your complex systems. We have carefully thought of the mechanical and software design aspects in order to perform the integration.

The mechanical dimensions fit into twice as small dimensions as the standard version.
Thanks to the intuitive interface and the SDK libraries, the software helps you easily integrate the pressure controller. You can first control and use the pressure sensor with the ESI software. At a later stage, you can integrate instrumentation and use the OB1 flow controller with the available SDK libraries (C++, Python, MATLAB, LABVIEW). In addition to the ESI & SDKs, you can control the OB1 from any system (Mac, Linux, Arduino, Raspberry Pi, PLC) thanks to its new serial communication protocol.

Highly customizable

The pressure controller can be customized to fit your needs. Contact us so that we can provide you with the best product for your needs.

Highly customizable: 2-channels, 4-channels, 8-channels, 16-channels, 32-channels and 64 channels (more on demand).
Each pressure outlet can be set with a specific maximum pressure range: (200 mbar, 2 bar, 8 bar, -900mb/+1bar)
Each channel can be coupled with an additional flow meter

Digital Microfluidics
Flow Chemistry
Polymer synthesis
Enhanced oil recovery

Cell culture: cell perfusion
Cell culture and imaging: sequential injection
Organ on a Chip
Lab on a chip

This table summarizes the main specifications of the Elveflow® OB1 MK4 OEM pressure controller. To provide quality & performance, all of our instruments are tested and calibrated independently (response time, stability, repeatability… ) after being assembled and all test results are kept.

CHANNEL PRESSURE RANGE	0 to 200 mbar* (0 to 2.9 psi)	0 to 2,000 mbar* (0 to 29 psi)	0 to 8,000 mbar* (0 to 116 psi)	-900 to 1,000 mbar* (-13 to 14.5 psi)	-900 to 6,000 mbar* (-13 to 87 psi)
PNEUMATICS
Pressure stability (1)	0.015 % FS / 30 µbar (0.0004 psi)	0.005 % FS / 100 µbar (0.0014 psi)	0.006% FS / 500 µbar (0.007 psi)	-900 to 500 mbar:	-900 to 2,000 mbar:
				0.005 % FS / 100 µbar (0.0014 psi)	0.005 % FS / 350 µbar (0.05 psi)
				500 to 1,000 mbar:	2,000 to 6,000 mbar:
				0.007 % FS / 150 µbar (0.0021 psi)	0.007 % FS / 525 µbar (0.076 psi)
Response time (2)	< 10 ms
Settling time (3)	down to 50 ms
Minimum pressure increment	0.006 % FS / 12 µbar (0.00017 psi)	0.006 % FS / 120 µbar (0.0017 psi)	0.006 % FS / 480 µbar (0.007 psi)	0.0064 % FS / 120 µbar (0.0017 psi)	0.0061 % FS / 420 µbar (0.006 psi)
Number of independent channel outlets	From 1 to 4 – any pressure range mix configuration possible
Output pneumatic connector	4mm push-in
Pressure supply	1.5 bar (or Max pressure + 0.5 bar) to 10 bar Non corrosive, non explosive, dry and oil-free gases, e.g. air, argon, N2, CO2, … Compatible with gas line, compressor or gas canister Input connector: 6mm push-in
Input vacuum (4)	/			Any value from -0.7 to -1 bar Compatible with vacuum pump or vacuum line
FLOW CONTROL
Flow sensor compatibility	Compatible with the whole MFS and BFS range Monitoring and feedback loop flow control available
Flow rates	From 0,1 µL/min to 500 mL/min (indicative, please refer to the MFS and BFS series)
Liquid Compatibility	Non contact pump Any aqueous, oil, or biological sample solution.
CONTROL & MONITORING
Software control	Elveflow Smart Interface Windows 7, 8 and 10, both 32 and 64 bit versions supported
Software Development Kit	Librairies available: Matlab, Python, Labview, C++ Windows 7, 8 and 10, both 32 and 64 bit versions supported Serial/UART communication protocol on request
Data management	Possibility to log and extract data (.csv): channel and sensor detailed information using ESI
Input profiles	Possibility to load profiles: ramp, sine, triangle, square or custom
Automation	Generate step-by-step sequences using the ESI built-in sequencer Load and save custom configurations (.csv)
Screen	None
ELECTRICAL CONNECTION
USB connection	USB B
Sensor connection	One M8-4 pins connecter available per channel Compatible with Elveflow sensors: MFS, MPS, MFP, MBD Custom analog sensor supply: 5-24VCustom analog sensor readout : 0-10V
TTL trigger	In and out available 0-5V
OTHER
Power consumption	12 W (100 V to 240 V – 50 Hz to 60 Hz)
Casing dimensions (5)	(length x width x height): 240 x 150 x 51 mm
Weight	1.4 kg to 2.9 kg

Non-contractual information, may be changed without notice

*Max pressure value might vary by +/- 2.5%
⁽¹⁾ Pressure stability (standard deviation) measured over the full pressure range with an external high accuracy pressure sensor (Druck DPI150) ⁽²⁾ Time required to reach 5% of the setting point. Depends on the computer operating system ⁽³⁾ Time required to reach 95% of the set point. Volume dependent – Measurement was done on 12 mL reservoir for a set point from 0 to 200 mbar ⁽⁴⁾ A vacuum source is mandatory for calibration and use of dual channels even if the channels are to be used in pressure only⁽⁵⁾ (length x width x height).

Categorie 1

Download - 0 Mo

ESI is Elveflow’s more advanced software interface, built to make every experimenter’s life better. It is perfectly adapted from simple setups control to very advanced setups and workflows automation. It integrates several modules that make time-consuming and painful tasks so simple. It comes with SDK libraries (C++, Python, MATLAB, LabVIEW) to control the Elveflow system from with own code.

Advantages of Pressure control in microfluidics

Pressure controller dedicated to microfluidic setups

For more details about Pressure driven flow control, please read this application note.

microfluidic oem & custom solutions

Our engineers work together in interdisciplinary teams and our project managers will provide you with experienced-based guidance to the final result. By centralizing our expertise, and thanks to an efficient and fast communication, we are able to translate your ideas into a product within a short time frame. We are available for our partners at any time.

Working with us enables you to move resources away from technical developments and focus on innovation.

Why choose us as an OEM partner?

Benefit from our expertise – Our management is based on senior engineers. We launched up to 15 new microfluidic products in the last 4 years and are used to drive projects with external partners. Our R&D team is familiar with the challenge of industrializing a new product and will provide you with advice and guidance.

A receptive and efficient partner – We are well aware of the importance of keeping up with the fast-changing market you want to address. At Elveflow, we are driven by a reactive and efficient project management. You are ensured that your projects are delivered on time and match your requirements.

A soft intellectual property policy – We believe that intellectual property should never be an obstacle to innovation. With our open-source philosophy, you are able to integrate our OEM solutions to your products and easily patent your innovation.

A trusted manufacturer – We have a proven track record working with high profile companies worldwide.

Need help or technical information?

Talk to an expert

Products and associated accessories

Manifold 3 to 1 or 4 to 1

OEM - Custom Manifolds

Microfluidic deported flow switches

OEM - Mux Distribution

OEM - Rotary valve controller

12/1 rotary bidirectional microfluidic valve OEM version

OEM - 2/2 and 3/2 valves with 16 ports valve controller

OEM - Valve and Valve controller

Easily integrate the control up to 16 microfluidic 2-way and 3-way valves

Need help or advice?

For any help to determine what microfluidic instruments you need, you can contact us!
Our experts will help you build the best microfluidic setup for your application, with our state-of-the-art microfluidic line.