In just 2 hours, our training enables you to master the basics and begin practical application immediately, ensuring a fast and efficient setup of our equipment.
Benefit from over 13 years of expertise in microfluidics and microfabrication. Our seasoned professionals are here to impart valuable knowledge and insights.
Receive specialized assistance whenever you need it. We're committed to enhancing your fluidics experience by sharing essential tips and tricks tailored to your specific needs.
Elveflow products are thought to be easy to use nevertheless versatile to answer the wideness of the applications microfluidics can be used for. Moreover we know our users come from all disciplines and have more or less backgrounds in microfluidics. That’s why we provide tailored training for each specific case.
Do not hesitate to talk to our experts to know more and define the best support you want.
We basically have two kinds of training, on site or on remote to fit your needs and budgets.
Level 1: Tutorial Kit (2 hours) (with the off-the-shelf or OEM range)
This training is perfect if you are new in the microfluidic world as our experts will help you discover the principles of microfluidics. They will also guide you to familiarize yourself with the Elveflow pressure controller (OB1 or OEM pressure controller) and flow sensors. We recommend this 2-hour course, perfect for learning how to set up flow control.
During this course, you will learn:
Level 2: Setup Installation (2 hours)
You already know the basics of microfluidics, are familiar with the OB1 pressure controller and the flow sensor, and master the flow rate control. However, you are using other Elveflow equipment and would like an introduction to install and use them quickly. We can assist you to set up your equipment and answer all your questions. With this training, no more waste of time, you can start your experiment in no time.
Do you want the ESI software to hold no secrets for you? Do you want to know all the features and be able to use it to best effect? This training is for you!
You will learn:
Level 3: Application (1 hours)
You already know the Elveflow equipment, how they work and how to control them through the ESI software but you wish to exchange information about your application and need advice to reach your goals. Elveflow gathers numerous microfluidics experts with different backgrounds that can help you to improve your set-up and your experiments.
Level 4: Integration Training (2 hours)
UART training: Choose this 2-hour course to familiarize yourself with the UART communication protocols that govern the use of our industrial modular range. If you plan on integrating the range to a complex system and are not familiar with UART protocols, we advise you to take this course, in order to discover all the tips in terms of communication.
In the second part of the course, with the help of our trainers, you will apply your knowledge to an applied example.
SDK training: Choose this 2-hour course to familiarize yourself with the SDK. If you plan on integrating the Elveflow range to a complex system and are not familiar with SDK, we advise you to take this course, in order to discover all our tips concerning programming.
Level 5: Consultancy (by 1 hour)
1. Microfluidic Training
On Site installation (1 to 5 days)
If you prefer to get an onsite training to get the benefit of our experts for a long time directly working with your team it’s possible too. Depending on the location of your facility a minimum of 2 days of training will be required to validate the offer. Apart from this we can adjust the time and the program to your specific needs. During the onsite training any of the training levels can be realized, we can also work more deeply on your application of course without being committed to results.
2. Microfabrication Training
On-site installation (2 to 5 days)
This service is for microfabrication offers, it’s usually one week to do:
On-site training involves our experts visiting your location to provide hands-on instruction and support. Remote training is conducted virtually, using online tools.
Training sessions range from 2 hours to 5 days, depending on the level of training and your specific needs.
The training fee includes the time of our experts, any necessary materials or software, and access to our online resources.
Yes, we can tailor the remote training to address your particular needs and interests.
You will need a PC computer with a stable internet connection. We will provide any necessary software or tools.
Yes, our Level 1 training is designed for those new to microfluidics.
Yes, we can customize a training package to meet your specific requirements.
Do you want to learn more about microfluidics?
For any help to determine what microfluidic instruments you need, you can contact us! Our experts will help you build the best microfluidic setup for your application, with our state-of-the-art microfluidic line.
Get a quote
Name*
Email*
Message
Newsletter subscription
We will answer within 24 hours
By filling in your info you accept that we use your data.
Collaborations
Need customer support?
Serial Number of your product
Support Type AdviceHardware SupportSoftware Support
Subject*
I hereby agree that Elveflow uses my personal data Newsletter subscription
How can we help you?
Message I hereby agree that Elveflow uses my personal data Newsletter subscription