Microfabrication stations
PDMS membrane Station
Make your own PDMS membranesHigh precision & wide thickness range
Low vibration spin coater to control speed, acceleration, and thickness
No PDMS ageing
10 minutes protocol of repeatable and reproducible experiments
Easy to Use
We provide tutorials to produce high-standard membranes
Turnkey Station
All required equipment and accessories for complete autonomous PDMS membrane manufacturing
Contact us
Features & Benefits
Benefits
- Easily and quickly create your own PDMS membranes.
- Precise control over your PDMS membrane thickness.
- Robust processes to enable easy reproducibility.
- Fabricate your membrane without initial knowledge of microfabrication.
- Get the best equipment to ensure your facility for long lifetime.
Included
Equipment:
|
|
| Accessories:
All lab accessories (glass slides, Petri dishes, disposable cups, stirring rods, scalpels, etc.) are included. We give you all the products’ references and providers’ information to refill your stock. |
 |
| Chemicals:
All chemicals (PDMS, TMCS, AZ4562, Isopropanol, Acetone, etc.) are included. We give you all the products’ references and providers’ information to refill your stock. |
 |
Support
- Standard support pack: We take care of the after sale of all your instruments, we provide you microfabrication process-sheet and tutorials, and we provide you 1-year phone assistance to answer any microfabrication questions you could have.
- Extended support pack: In addition to the standard pack our R&D team installs the Softlithobox directly in your lab, we adapt on site all our microfabrication processes to your needs, and we train your team until they become ready to fabricate all your microfluidic chips.
Spin coater
We offer you all the equipment, accessories, and chemicals needed to make highly reproducible PDMS membranes. Prepare your PDMS, choose the thickness, and quickly create your PDMS membranes for your experiment in less than one hour!
Our system ensures you:
- highly reproducible PDMS membranes
- Easy manufacturing of PDMS membranes
- High-precision PDMS membrane thickness
- Wide range of PDMS membrane thickness
Vacuum pump / Air compressor
The Spin coater needs a 4bar pressure and vacuum access to work correctly. The vacuum is used to maintain the wafer on the chuck, and the pressure protects the Spin coater from the liquid, photoresist, or PDMS from getting inside the rotor.
We also provide an efficient, powerful, and noiseless vacuum pump and air compressor in case your laboratories do not have pressurized air or vacuum lines, or if you wish to install your station anywhere in your facilities.
Hot plate
Our hot plate is ideal for the final steps of hardening the PDMS or – depending on the process – baking some photoresist.
We offer a simple and efficient hot plate with the best quality and price conditions.
An adaptive offer!
Since each laboratory is different, since each research is unique, we do adapt the offer to be as close as possible of the real need. We discuss together what will be the best efficient facility and thus add or remove equipment, accessories, chemicals.
Do not hesitate to ask one of our technico-commercials to make an assessment of your facility and to advise you on your project.
Options
We have created basic offer with every thing needed to have a complete working set, but some option can be add according to each situation. We have selected some option commonly use during softlithography process but do not hesitate to ask our engineer if you have special expectations.
|
Developer Agitator
|
Optical profiler
|
Little fume hood – Extractor3.5
|
Job
Collaborations
Customer
Other
