I. Dynamic cell culture: WEBINAR
For more insight into methods and techniques to perform cell perfusion, please refer to this webinar introducing the concept of dynamic cell culture by incorporating perfusion, and describing the benefits of fluid flow, mechanical tension and shear stress to in vitro cell models of physiology and disease.
This webinar was performed by Lisa Muiznieks, research engineer held in May 2020. Here is the free PDF version of the webinar.
II. Critical issues in perfusion cell culture
Another way to reduce shear stress is to use microfluidic chips with dedicated geometries, such as microfluidic chips including a porous membrane acting as a barrier for the medium flow.
Temperature control
Temperature is a critical parameter of the cell environment for long-term studies on live cells. Several temperature control systems designed to be used while performing live-cell imaging are commercially available.
Bubble formation
Air bubbles have a strong detrimental effect on cell culture. First, bubble trapped inside tubing or microfluidic channels can obstruct fluid flow. Then, bubbles are known to kill cells at their gas-liquid interface. A good way to eliminate bubbles is to apply a high flow rate inside the perfusion system prior to seeding the cells. A soft surfactant medium, like SDS is very effective to release air bubble from perfusion chamber.
III. How to choose the best chamber & system for perfusion cell culture?
Perfusion chamber
A wide range of perfusion chambers are commercially available. Live cell imaging experiments can be performed with conventional perfusion chambers, microslides or microfluidic chips. Depending on your experiment, some chambers will be more suited to your needs. Don’t hesitate to read our review about perfusion chambers for imaging for more technical information about the different types of perfusion chambers, and to check our short overview of the different perfusion chambers commercially available.
Perfusion system
Again, the choice of a perfusion system depends on the type of experiment. For simple live cell imaging experiments, pressure-driven flow controller, syringe or peristaltic pumps can be used. For experiments requiring more control over cells environment, injection at very low flow rates or switch between different media/reagents, pressure-driven are more adapted.
Feel free to contact our team of experts if you need help choosing the system that best fits the need of your experiment!
Other reviews & tutorials about perfusion culture for live cell imaging:
For more tutorial about microfluidics, please visit our other tutorials here: «Microfluidics tutorials».
The photos in this article come from the Elveflow® data bank, Wikipedia or elsewhere if precised. Article written by Emmanuelle Nadal and Timothée Houssin.